Can't receive email from outside

spartacus31
Posts: 1
Joined: Tue Feb 10, 2009 3:09 am

Can't receive email from outside

Postby spartacus31 » Tue Feb 10, 2009 3:17 am

Dear All,

I have a problem with my mail server right now, the problem is can't receive the email from outside. when i try to send email from my yahoo always bouncing, herewith the error messages 503 This mail
server requires authentication when attempting to send to a non-local
e-mail address. Please check your mail client settings or contact your
administrator to verify that the domain or address is defined for this
server. (in reply to RCPT TO command).. please help me, right now i cannot comunicate with my client.. thx

-spartacus-

MailEnable-Ben
Posts: 5858
Joined: Fri Jan 16, 2004 6:49 am
Location: Melbourne
Contact:

Postby MailEnable-Ben » Mon Mar 02, 2009 1:09 am

This error is saying that the address you are sending to does not exist on the MailEnable server. You need to confirm that the address map exists for this mailbox (check the address TAB for the mailbox properties, that is if the mailbox exists at all).

You should also check the MailEnable SMTP and POP activity and debug logs as they will tell you more about why the address is not found.

If there is a problem with your configuration files you may need to use the following recovery method;

http://www.mailenable.com/kb/viewarticl ... 020069.htm

If your config files are corrupt then make sure you have not ran out of disk space or have a faulty hard drive.
Regards,

Product Services
MailEnable Pty Ltd

To keep track of all ME company updates and version releases you should subscribe to the MailEnable list at http://www.mailenable.com or the RSS feed http://www.mailenable.com/rss.

almahmeed205
Posts: 2
Joined: Sat Mar 12, 2016 6:29 pm

Re:

Postby almahmeed205 » Thu Mar 17, 2016 6:49 am

MailEnable-Ben wrote:This error is saying that the address you are sending to does not exist on the MailEnable server. You need to confirm that the address map exists for this mailbox (check the address TAB for the mailbox properties, that is if the mailbox exists at all).

You should also check the MailEnable SMTP and POP activity and debug logs as they will tell you more about why the address is not found.

If there is a problem with your configuration files you may need to use the following recovery method;

http://www.mailenable.com/kb/viewarticle.asp?SS=recover&File=me020069.htm

If your config files are corrupt then make sure you have not ran out of disk space or have a faulty hard drive.


what i have done is i send email to mxtoolbox.com to check the email how long take arrive.

and that was showing in my SMTP debug

Code: Select all

[03/17/16 09:40:16]****************** LOG FILE STARTED *******************
03/17/16 09:40:16   ME-I0143: Service Loading Configuration Providers
03/17/16 09:40:16   ME-IXXXX: Loaded Address Map Provider
03/17/16 09:40:16   ME-IXXXX: Loaded Authentication Provider
03/17/16 09:40:16   ME-IXXXX: Loaded MEAISM Configuration Provider
03/17/16 09:40:16   ME-IXXXX: Loaded MEAIDP Directory Provider
03/17/16 09:40:16   ME-IXXXX: Loaded MEAILS Configuration Provider
03/17/16 09:40:16   ME-IXXXX: Loaded Postoffice Configuration Provider
03/17/16 09:40:16   ME-I0073: MEW2KDNS Initialized to use DNS Servers (xx.xx.xx.xx)
03/17/16 09:40:16   ME-IXXXX: No plug-in DLL configured
03/17/16 09:40:16   ME-I0141: Service Starting
03/17/16 09:40:16   ME-I0139: Outbound Mail Agent Initialised
03/17/16 09:40:16   ME-I0140: Standard Inbound Mail Agent Initialised
03/17/16 09:40:16   ME-I0082: Service binding to all addresses on port (587) for IPv4 family (2). Requires authentication 0
03/17/16 09:40:16   ME-I0085: Service (Alternate) binding to all IPv4 addresses on port (80). Requires authentication 1
03/17/16 09:40:16   ME-F0084: Unable to bind alternate port to IP Address ((All)), Port (80), Family (2). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:40:16   ME-IXXXX: Initalised Recv Message Master Thread
03/17/16 09:40:16   ME-I0076: Listening for connections
03/17/16 09:40:16   ME-I0065: [SYSTEM] Initalised Send Message Master Thread
03/17/16 09:40:16   ME-I0065: [SYSTEM] Resetting queued messages
03/17/16 09:40:16   ME-I0066: [SYSTEM] No outgoing message files in queue.
03/17/16 09:40:21   ME-F0084: Unable to bind alternate port to IP Address ((All)), Port (80), Family (2). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:40:26   ME-F0084: Unable to bind alternate port to IP Address ((All)), Port (80), Family (2). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:40:31   ME-F0084: Unable to bind alternate port to IP Address ((All)), Port (80), Family (2). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:40:36   ME-F0084: Unable to bind alternate port to IP Address ((All)), Port (80), Family (2). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:40:37   ME-I0135: Authenticated User:postmaster@domain.com using Authentication Provider Credentials
03/17/16 09:40:38   ME-I0106: [708] Relay Granted: [SMTP:postmaster@domain.com] is in local address map.
03/17/16 09:40:39   ME-I0149: [708] B34EC7206B014CAEB0EF1D4985E6B544.MAI was received successfully and delivery thread was initiated
03/17/16 09:40:40   ME-I0018: [67E85C12AB2A46E38F1A6911DD2C525F.MAI] Outbound message from ([SMTP:postmaster@domain.com]) requeued as [C46702C33DFA46A2A3EBDE2080449B46.MAI] to the target domain [tools.mxtoolbox.com]
03/17/16 09:40:40   ME-I0122: Domain to [tools.mxtoolbox.com] will be smart hosted by the Connector to [dedrelay.secureserver.net]
03/17/16 09:40:40   ME-I0026: [C46702C33DFA46A2A3EBDE2080449B46.MAI] Sending message
03/17/16 09:40:40   ME-IXXXX: [C46702C33DFA46A2A3EBDE2080449B46.MAI] DNS resolved to the following record: IP Address=208.109.80.54, Family=2, Type=1, Protocol=6
03/17/16 09:40:41   ME-I0049: [C46702C33DFA46A2A3EBDE2080449B46.MAI] Send Completed Successfully (0.033s).
03/17/16 09:40:41   ME-F0084: Unable to bind alternate port to IP Address ((All)), Port (80), Family (2). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:40:42   ME-I0074: [708] (Debug) End of conversation
03/17/16 09:40:46   ME-F0084: Unable to bind alternate port to IP Address ((All)), Port (80), Family (2). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:40:51   ME-F0084: Unable to bind alternate port to IP Address ((All)), Port (80), Family (2). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:40:56   ME-F0084: Unable to bind alternate port to IP Address ((All)), Port (80), Family (2). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:41:01   ME-F0084: Unable to bind alternate port to IP Address ((All)), Port (80), Family (2). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:41:06   ME-F0084: Unable to bind alternate port to IP Address ((All)), Port (80), Family (2). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:41:11   ME-F0084: Unable to bind alternate port to IP Address ((All)), Port (80), Family (2). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:41:16   ME-I0082: Service binding to all addresses on port (587) for IPv6 family (23).
03/17/16 09:41:16   ME-I0085: Service (Alternate) binding to all IPv6 addresses on port (80).
03/17/16 09:41:16   ME-F0083: Unable to bind to IP Address ((All)), Port (80), Family (23). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:41:16   ME-IXXXX: Initalised Recv Message Master Thread
03/17/16 09:41:16   ME-I0076: Listening for connections
03/17/16 09:41:21   ME-F0083: Unable to bind to IP Address ((All)), Port (80), Family (23). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:41:26   ME-F0083: Unable to bind to IP Address ((All)), Port (80), Family (23). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:41:31   ME-F0083: Unable to bind to IP Address ((All)), Port (80), Family (23). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:41:36   ME-F0083: Unable to bind to IP Address ((All)), Port (80), Family (23). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:41:41   ME-F0083: Unable to bind to IP Address ((All)), Port (80), Family (23). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:41:46   ME-F0083: Unable to bind to IP Address ((All)), Port (80), Family (23). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:41:51   ME-F0083: Unable to bind to IP Address ((All)), Port (80), Family (23). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:41:56   ME-F0083: Unable to bind to IP Address ((All)), Port (80), Family (23). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:42:01   ME-F0083: Unable to bind to IP Address ((All)), Port (80), Family (23). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:42:06   ME-F0083: Unable to bind to IP Address ((All)), Port (80), Family (23). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:42:11   ME-F0083: Unable to bind to IP Address ((All)), Port (80), Family (23). Error (10013). Could not start service. Check that another service is not running or security software has not prevented access to the port.
03/17/16 09:42:16   ME-I0144: Service Completed Loading Agents
03/17/16 09:43:42   ME-I0149: [716] 8573E6AE4B144737B6972DCECE22C5C6.MAI was received successfully and delivery thread was initiated
03/17/16 09:43:47   ME-I0074: [716] (Debug) End of conversation


Who is online

Users browsing this forum: No registered users and 4 guests